(1) When using the minimum bending radius, do not make sharp bends in the hose.
(2) In order to prevent curling, we must ensure that the installation position of the hose is consistent with the bending direction of the hose.
(3) When the internal pressure is applied to the hose, the length of the hose will cause some changes. But remind everyone not to fix the bent part of the hose in order to suppress such changes.
(4) When using high voltage, since the length variation range is between 2% and -4%, it is necessary to leave enough room for expansion and contraction of the hose during the installation process.
(5) To reduce the number of joints, for aesthetic appearance and to shorten the assembly, please use suitable accessories instead of pipes.
(6) When using elbows for hose connections, be careful not to twist or bend the hose severely.
(7) Using auxiliary fittings, arrange the hoses in a straight line. This can prevent the hose from being too long and make the appearance simple and beautiful. After many experts install the hose, it is neat and uniform, because of this detail.
(8) The length of the hose must have an appropriate margin. This allows the hose to move smoothly without sharp bends.
(9) When the hose is bent and installed on two different sides, in order to prevent twisting, the hose can be fixed in one plane.
(10) In order to prevent the hose from twisting during installation, the marks on the hose can be used as twist prevention lines. In addition, if the connecting piece has a connecting nut, you must use a wrench to apply force to the hexagon of the screw before installation.
overview. Look at this, do you have a new understanding of hydraulic hose installation? Again, the installation of hydraulic hoses is not difficult, even a novice Xiaobai can easily do it.
