Hdpe Farm Irrigation Pipe
Standard: GB/T13663-2000, ISO 4427-1:2007
Specification: 20-1200mm
Pressure: 0.6MPa SDR26, 0.8MPa SDR21, 1MPa SDR17, 1.25MPa SDR 13.6, 1.6MPa SDR 11
Product introduction:
Product Name: hdpe farm irrigation pipe
Color: Black with bule line
Standard: GB/T13663-2000, ISO 4427-1:2007
Specification: 20-1200mm
Pressure: 0.6MPa SDR26, 0.8MPa SDR21, 1MPa SDR17, 1.25MPa SDR 13.6, 1.6MPa SDR 11
Main application: Water Supplying and Draining
Guarantee: More than 50 years
Product Description:
Highlight advantages of HDPE pipes
- Light-weight, ease of handling.
- Shiny inner and outer surface, small coefficient of friction.
- Low coefficient of heat transfer (unfrozen water).
- High mechanical strength and impact strength.
- Correct using in comply with technical requirement leads the life span of over 50 years.
- High flexibility, adaptive to ground movement (earthquake).
- Enduring acid, alkaline and saline solution at temperature of below 60ºC.
- Ability to perform under low temperature up to -40ºC (applicable at place with cold climate).
- Ability to perform under sunlight, unable to be ionized under.
Pipe Performance and Feature:
1.Non-toxic, health: PE pipe material non-toxic, it belongs to green building materials, never scaling, which can effectively improve the water quality.
2.Corrosion resistance: PE belongs to inert materials, can resistance to various chemical media.
3.PE pipe is connected by electric melting, its interface strength higher than tube itself.
4.High toughness: fracture extension rate of PE pipe, commonly more than 500%. .
5.Excellent resistance to quickly crack propagation (RCP) ability.
6.Excellent flexible and resistance to scratches ability.
7.Good wear resistance, low wall friction coefficient, small flow resistance, excellent conveying ability.
8.Can use a variety of trenchless ways, great convenient for construction and installation.
9.Low system cost, less maintenance costs, can dramatically reduce the cost for the project.
10.Long service life: dark bury PE pipe normal uses more than five years.
Product parameters
|
Code |
S20 |
S16 |
S12.5 |
S10 |
S8 |
S6.3 |
S5 |
S4 |
Meter/PC |
|
Nominal Pressure |
0.4MPa |
0.5MPa |
0.6MPa |
0.8MPa |
1.0MPa |
1.25MPa |
1.6MPa |
2.0MPa |
|
|
SDR |
SDR41 |
SDR33 |
SDR26 |
SDR21 |
SDR17 |
SDR13.6 |
SDR11 |
SDR9 |
|
|
O.D |
Thickness |
Thickness |
Thickness |
Thickness |
Thickness |
Thickness |
Thickness |
Thickness |
|
|
16 |
- |
- |
- |
- |
- |
- |
- |
2.3 |
Roll/Piece |
|
20 |
- |
- |
- |
- |
- |
- |
2.3 |
2.3 |
Roll/Piece |
|
25 |
- |
- |
- |
- |
- |
2.3 |
2.3 |
3.0 |
Roll/Piece |
|
32 |
- |
- |
- |
- |
2.3 |
2.4 |
3.0 |
3.6 |
Roll/Piece |
|
40 |
- |
- |
- |
2.3 |
2.4 |
3.0 |
3.7 |
4.5 |
Roll/Piece |
|
50 |
- |
- |
2.3 |
2.4 |
3.0 |
3.7 |
4.6 |
5.6 |
Roll/Piece |
|
63 |
- |
- |
2.5 |
3.0 |
3.8 |
4.7 |
5.8 |
7.1 |
Roll/Piece |
|
75 |
- |
- |
2.9 |
3.6 |
4.5 |
5.6 |
6.8 |
8.4 |
6.9.12 |
|
90 |
- |
- |
3.5 |
4.3 |
5.4 |
6.7 |
8.2 |
10.1 |
6.9.12 |
|
110 |
- |
- |
4.2 |
5.3 |
6.6 |
8.1 |
10.0 |
12.3 |
6.9.12 |
|
125 |
- |
- |
4.8 |
6.0 |
7.4 |
9.2 |
11.4 |
14 |
6.9.12 |
|
140 |
- |
- |
5.4 |
6.7 |
8.3 |
10.3 |
12.7 |
15.7 |
6.9.12 |
|
160 |
- |
- |
6.2 |
7.7 |
9.5 |
11.8 |
14.6 |
17.9 |
6.9.12 |
|
180 |
- |
- |
6.9 |
8.6 |
10.7 |
13.3 |
16.4 |
20.1 |
6.9.12 |
|
200 |
- |
- |
7.7 |
9.6 |
11.9 |
14.7 |
18.2 |
22.4 |
6.9.12 |
|
225 |
- |
- |
8.6 |
10.8 |
13.4 |
16.6 |
20.5 |
25.2 |
6.9.12 |
|
250 |
- |
- |
9.6 |
11.9 |
14.8 |
18.4 |
22.7 |
27.9 |
6.9.12 |
|
280 |
- |
- |
10.7 |
13.4 |
16.6 |
20.6 |
25.4 |
31.3 |
6.9.12 |
|
315 |
7.7 |
9.7 |
12.1 |
15.0 |
18.7 |
23.2 |
28.6 |
35.2 |
6.9.12 |
|
355 |
8.7 |
10.9 |
13.6 |
16.9 |
21.1 |
26.1 |
32.2 |
39.7 |
6.9.12 |
|
400 |
9.8 |
12.3 |
15.3 |
19.1 |
23.7 |
29.4 |
36.3 |
44.7 |
6.9.12 |
|
450 |
11.0 |
13.8 |
17.2 |
21.5 |
26.7 |
33.1 |
40.9 |
50.3 |
6.9.12 |
|
500 |
12.3 |
15.3 |
19.1 |
23.9 |
29.7 |
36.8 |
45.4 |
55.8 |
6.9.12 |
|
560 |
13.7 |
17.2 |
21.4 |
26.7 |
33.2 |
41.2 |
50.8 |
62.5 |
6.9.12 |
|
630 |
15.4 |
19.3 |
24.1 |
30.0 |
37.4 |
46.3 |
57.2 |
70.3 |
6.9.12 |
|
710 |
17.4 |
21.8 |
27.2 |
33.9 |
42.1 |
52.2 |
64.5 |
79.3 |
6.9.12 |
|
800 |
19.6 |
24.5 |
30.6 |
38.1 |
47.4 |
58.8 |
72.6 |
89.3 |
6.9.12 |
|
900 |
22.0 |
27.6 |
34.4 |
42.9 |
53.3 |
66.2 |
81.7 |
- |
6.9.12 |
|
1000 |
24.5 |
30.6 |
38.2 |
47.7 |
59.3 |
72.5 |
90.2 |
- |
6.9.12 |
|
1200 |
29.4 |
36.7 |
45.9 |
57.2 |
67.9 |
88.2 |
- |
- |
|
|
1400 |
34.3 |
42.9 |
53.5 |
66.7 |
82.4 |
102.9 |
- |
- |
|
|
1600 |
39.2 |
49.0 |
61.2 |
76.2 |
94.1 |
117.6 |
- |
- |
|
|
1800 |
43.8 |
54.5 |
69.1 |
85.7 |
105.9 |
- |
- |
- |
|
|
2000 |
48.8 |
60.6 |
76.9 |
95.2 |
117.6 |
- |
- |
- |
|
|
2250 |
55.0 |
70.0 |
86 |
107.2 |
- |
- |
- |
- |
|
|
2500 |
61.2 |
77.7 |
95.6 |
119.1 |
- |
- |
- |
- |
|
|
Remark: The products marked in red have no shaped sleeves, which need to be customized. |
|||||||||
FAQ
Q: Can you produce the hose with my own brand?
A: Yes, we have been offering OEM service for 10 years.
Q: Can you send us a sample to test quality before ordering?
A: Yes, we can provide sample by free but the freight and other charges is payed by the customers.
Q: Could we pay a visit to your factory?
A: Yes, you are always welcome to visit our factory.
Q: Can you help us do the custom clearance?
A: Yes, we can. We can help you find a professional custom clearance company to do it.
Q: Can we get the goods without your company name to export?
A: Yes, we can. We are allowed to use your designated agent’s name if you have one.
Q: Can you produce goods with special specification?
A: First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.
Hot Tags: hdpe farm irrigation pipe, China, suppliers, manufacturers, factory, low price, Hdpe Pipes, Ppr Pipe, Hdpe Double Wall Corrugate Pipes, Plastic Hose
You Might Also Like
Send Inquiry