Aug 04, 2022 Leave a message

Selection and use of PVC irrigation hose

The choice of PVC irrigation hose:

1. The outer skin of the PVC irrigation water belt of the hose should be evenly woven, and the surface should be clean without repetition, breakage, weft skipping and scratching.

2. The thickness of the fire hose lining should be uniform, and the surface should be smooth and flat without wrinkles or other defects.

3. The burst pressure and working pressure of the support hose of the PVC irrigation water belt should meet the needs of use, and there will be no pipe burst or delamination.


The use of PVC irrigation hose:

1. PVC irrigation hose laying. When laying the water hose, avoid sharp objects and various oils. When laying the water hose vertically to a high place, use the hose hook. When running, the water belt should pass under the track to avoid the water belt being crushed by the wheels and the water supply is interrupted.

2. Water hose for agricultural irrigation equipment: The main body of the lining fire hose is made of high-strength polyester filaments, and is precisely woven by a circular loom, high pressure resistance, the inner wall is lined with high-quality rubber, the coating is smooth, and the resistance is small. Alkali and pressure resistance. Generally, as long as it is not damaged and does not leak water, it will last a long time.

3. Prevent freezing. In the severe winter season, when the water supply needs to be suspended, in order to prevent the water belt from freezing, the pump needs to run at a slow speed to maintain a small water output.

4. When laying the hose, avoid sudden twists and turns to prevent the ability to withstand water pressure; also avoid twisting to prevent the hose from rotating after water injection and causing the internal buckle hose connector to disconnect.

5. After adding water, avoid forcibly dragging the hose to the ground. When you need to change positions, lift and move as much as possible to reduce wear and tear on the PVC irrigation hose and ground.

6. Keep the PVC irrigation hose properly and avoid contact with corrosive chemicals such as oil, acid and alkali.


Send Inquiry

whatsapp

skype

E-mail

Inquiry