For the application characteristics of the high-pressure hose, the maximum pressure of the high-pressure hose is determined according to the working pressure of the system. Each high-pressure hose has a normal pressure, and the explosion pressure of the high-pressure hose is 3-4 times the maximum pressure. The higher the pressure, the more layers of stainless steel wire and the more meticulous the production of the product. Therefore, according to the actual pressure of the system, the maximum pressure of the high-pressure hose can ensure the normal operation of the system and choose the appropriate application. High-pressure hose.
Temperature is one of the factors considered by customers. The natural environment temperature in the high-pressure hose manufacturer's work is too high or too low will affect the service life of the high-pressure hose and the ability to withstand pressure, so use high pressure within its allowable range For rubber hose, the operating temperature of the system is not within its allowable range for a long time, you should choose a plastic hose sleeve or buy a special rubber hose.
When the high-pressure hose is used, the pressure should be adjusted slowly and evenly to avoid damage to the pipe body due to a sudden increase in pressure. When the working place is changed, it should be moved away from the ground, and the ground should not be mopped, so as not to scratch the outer rubber and corrode the skeleton layer. When transporting corrosive liquids, the interior should be cleaned after use to avoid long-term corrosion of the pipe body by residues, or select the corresponding series of products. When the high-pressure hose is moved to the top position, it should not be pulled too tightly, but should be relatively loose.
In order to better ensure the safety of high-pressure hose products, special attention should be paid to their loading and unloading work. The related hose products need to be shipped neatly in sorted rolls (strips). To avoid excessive bending and discounting of the hose body, it should not be placed on the hose. Stack other heavy objects.
Secondly, it is necessary to pay attention to strictly prohibit mixing hoses with acids, alkalis, oils, organic solvents, and flammable and explosive items; high-pressure hose products should not be in direct contact with goods with sharp edges. When we move the high-pressure hose, we should not drag it anywhere. For heavy products, we should use lifting equipment or special machinery to load and unload it, and prevent the high-pressure hose from being accidentally damaged.
