4'' Black Nitrile Hose
Material: EPDM,nitrile
Temperature: -30℃ - +80℃
Quantity: ISO/TS16949
Pressure: 0.3Mpa~1.2Mpa
Inner Diameter: 2mm ~ 135mm or as request
Product introduction:
Product: 4” black nitrile hose
Material: EPDM,nitrile
Temperature: -30℃ - +80℃
Quantity: ISO/TS16949
Pressure: 0.3Mpa~1.2Mpa
Inner Diameter: 2mm ~ 135mm or as request
Product Description:
Construction
1. Inner layer of hose: Nitrile Butadiene Rubber (NBR).
2. Protective layer of hose: blends of styrene butadiene rubber and ethylene-propylene-diene monmer rubber (EPDM).
3. Intermediate reinforced layer: high tensile braid of polyster fiber.
|
Material |
Temperature |
Characteristics |
Application |
|
NR |
-50~80℃ |
Good elasticity, tensile strength, wear resistance |
Tires, cushions, seals, cable insulation sleeves |
|
NBR |
-40~120℃ |
Oil resistance, wear resistance, high temperature and aging resistance |
Oil resistant seals, diaphragms, hose and soft tubing |
|
SIL/VMQ |
-60~250℃ |
High and low temperature resistance, non-toxic tasteless, aging resistance, insulation resistance, good thermal conductivity |
Household articles, seals, shock absorbers, electronic accessories |
|
EPDM |
-40~150℃ |
Weather resistance, ozone aging resistance, steam resistance, strong acid and alkali resistance |
Phosphate hydraulic oil system seals, hose and auto parts |
|
FKM/VITON |
-40~240℃ |
High temperature resistance, oil, chemical, aging resistance, good insulation, flame-retardant, less |
Heat and oil resistant sealing parts, rubber hoses |
|
SBR |
-50~110℃ |
The property is close to NR. good wear |
Tire, rubber sheet, rubber hose, rubber adhesive tape |
|
HNBR |
-40~150℃ |
Not easy to wear and deform, oil resistance |
Aerospace, automobile, oilfield drilling, petrochemical, textile and printing |
|
CR |
-40~120℃ |
Weather and ozone aging resistance, self extinguishing, good tensile strength, elongation and elasticity, good adhesion |
Sealing ring, rubber tube, coating, wire insulation layer, adhesive tape and prepared adhesive |
|
FVMQ |
-40~177℃ -40~232℃ (Dry environment) |
Resistant to strong acid, high and low temperature, oil, high pressure and aging |
Mechanical seal, petroleum industry, chemical industry, building materials |
|
FFKM |
250℃(regular) 320-330℃ (formula) |
Good performance, used in harsh environments, resistant to various solvents, strong acid and alkali, and good elasticity |
High quality and expensive seal rings. |
|
PU |
-40~90℃ |
Not easy to wear, withstand high pressure, not easy to aging and hydrolysis |
Building, automobile, aviation industry, thermal insulation, household goods, household appliances |
|
PTFE/F4 |
-80~260℃ |
Resistant to corrosion and abrasion, high and low temperature, aging, high pressure and all organic solvents |
Exhaust, steam pipes for transporting corrosive gases, high-pressure oil pipes, cold compression systems, valves and other chemical equipment. |
|
PVC |
-40~85℃ |
Light material, chemical resistance, low flow resistance, high mechanical strength, and good electrical insulation |
Water and gas supply and drainage, irrigation, exhaust pipes, wire conduits, industrial anti-corrosion for |
|
PA |
-20~150℃ |
Excellent strength, abrasion and chemical resistance, moisture absorption, long service life, |
Clothing, reinforcing materials of rubber materials (such as tires), ropes, vehicles and mechanical equipment. |
Product parameters
|
Size(mm/inch) |
WP(BAR/PSI) |
Meters/roll |
|
5 |
20 |
50/100 |
|
6(1/4) |
20 |
50/100 |
|
8(5/16) |
20 |
50/100 |
|
10(3/8) |
20 |
50/100 |
|
13(1/2) |
20 |
50/100 |
|
16(5/8) |
20 |
50 |
|
19(3/4) |
20 |
50 |
|
25(1) |
15 |
50 |
|
32(1 1/4) |
10 |
20/30 |
|
38(1 1/2) |
10 |
20/30 |
|
51(2) |
10 |
20/30 |
FAQ
Q: Can you produce the hose with my own brand?
A: Yes, we have been offering OEM service for 10 years.
Q: Can you send us a sample to test quality before ordering?
A: Yes, we can provide sample by free but the freight and other charges is payed by the customers.
Q: Could we pay a visit to your factory?
A: Yes, you are always welcome to visit our factory.
Q: Can you help us do the custom clearance?
A: Yes, we can. We can help you find a professional custom clearance company to do it.
Q: Can we get the goods without your company name to export?
A: Yes, we can. We are allowed to use your designated agent’s name if you have one.
Q: Can you produce goods with special specification?
A: First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.
Hot Tags: 4'' black nitrile hose, China, suppliers, manufacturers, factory, low price
Previous
Cheap Water Rubber HoseYou Might Also Like
Send Inquiry